C4 User Manual
Page 332 ©2021 Smartrise Engineering, Inc. All Rights Reserved October 25, 2021
2. From the GROUP SETUP menu, scroll and select Group Landing Offset.
Figure 669: GROUP SETUP Menu – Group Landing Offset
3. From the GROUP LANDING OFFSET menu, set the number of floors below a group that
are serviced by another group.
Figure 670: GROUP LANDING OFFSET Menu
4. Scroll right and press Save.
35.3 Dispatch Timeout
The dispatch timeout is a set time a car has to answer a hall call. If time has elapsed, the car is
taken out of group and the call is reassigned to another car.
The following procedure describes how to set the dispatch timeout.
1. Navigate to MAIN MENU | SETUP | GROUP SETUP. See Figure 60.
2. From the GROUP SETUP menu, scroll and select Dispatch Timeout.
Figure 671: GROUP SETUP Menu – Dispatch Timeout
3. From the DISPATCHING TIMEOUT menu, set the time the car has to answer a car call
prior to another car responding. A setting of 0 disables this feature.
Figure 672: DISPATCHING TIMEOUT Menu
4. Scroll right and press Save.
To Next Page
Loading...
Need help?
General
