C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 297
3. From the MR SMOKE menu, scroll and select Main or Alt.
Figure 578: MR SMOKE Menu – Main or Alt
4. From the MR: USE ALT FLOOR menu, scroll and select On.
.
Figure 579: MR: USE ALT FLOOR Menu
5. Scroll right and press Save.
33.3.6.2 Flash Fire Hat
If the fire flash hat been enabled during MR smoke, a fire hat symbol on the panel flashes when
smoke has been detected.
The following procedure describes how to enable the flash fire hat.
1. Navigate to MAIN MENU | SETUP | FIRE. See Figure 57.
2. From the FIRE SERVICE menu, scroll and select MR Smoke. See Figure 577.
3. From the MR SMOKE menu, scroll and select Flash Fire Hat.
Figure 580: MR SMOKE Menu – Flash Fire Hat
4. From the MR: FLASH FIRE HAT menu, scroll and select On.
Figure 581: MR: FLASH FIRE HAT Menu
5. Scroll right and press Save.
To Next Page
Loading...
