C4 User Manual
Page 338 ©2021 Smartrise Engineering, Inc. All Rights Reserved October 25, 2021
3. From the DISPATCH TIMEOUT menu, set the time for another car to take over the hall
call.
Figure 686: DISPATCH TIMEOUT Menu
4. Scroll right and press Save.
38.2 Buzzer Time
A buzzer may sound for a period of time after a hall call is placed.
The following procedure describes how to set the time a buzzer rings after a hall call is placed.
1. Navigate to MAIN MENU | SETUP | ATTENDANT. See Figure 60.
2. From the ATTENDANT menu, scroll and select Buzzer Time.
Figure 687: ATTENDANT Menu – Buzzer Time
3. From the BUZZER TIME menu, set the time the buzzer rings after a hall call has been
requested.
Figure 688: BUZZER TIME Menu
4. Scroll right and press Save.
To Next Page
Loading...
