C4 User Manual
Page 240 ©2021 Smartrise Engineering, Inc. All Rights Reserved October 25, 2021
2. From the MISCELLANEOUS menu, scroll and select Enable Construction Box.
Figure 416: MISCELLANEOUS Menu – Enable Construction Box
3. From the ENABLE CONSTRUCTION BOX menu, scroll and select On to enable the
construction box.
Figure 417: ENABLE CONSTRUCTION BOX Menu
4. Scroll right and press Save.
29.3 Maximum Run Time
The maximum run time is the maximum time that the car can run floor to floor.
The following procedure describes how to set the maximum run time.
1. Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 58.
2. From the MISCELLANEOUS menu, scroll and select Maximum Run Time.
Figure 418: MISCELLANEOUS Menu – Max Run Time
3. From the MAXIMUM RUN TIME menu, set the maximum time the car runs before a fault
occurs.
Figure 419: MAXIMUM RUN TIME Menu
4. Scroll right and press Save.
To Next Page
Loading...
Need help?
General
