EasyManua.ls Logo

SMC Networks 6724AL2

SMC Networks 6724AL2
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C
OMMAND
L
INE
I
NTERFACE
3-86
Default Setting
None
Command Mode
Global Configuration
Example
To specify the port 25, enter the following command:
description
Use this command to add a description to an interface. Use the no form
to remove the description.
Syntax
description string
no description
string - Comment or a description to help you remember what is
attached to this interface. (Range: 1-64 characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
The following example adds a description to port 25.
Console(config)#interface ethernet 1/25
Console(config-if)#
Console(config)#interface ethernet 1/25
Console(config-if)#description RD-SW#3
Console(config-if)#

Table of Contents

Related product manuals