EasyManua.ls Logo

SMC Networks 6724AL2

SMC Networks 6724AL2
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C
ONFIGURING
THE
S
WITCH
2-26
Downloading Configuration Settings from a Server
You can save the configuration file under a new file name and then set it as
the startup file, or you can specify the current startup configuration file as
the destination file to directly replace it. Note that the file
“Factory_Default_Config.cfg” can be copied to the TFTP server, but
cannot be used as a destination file name on the switch.
Web – Click System, File, Configuration. Enter the IP address of the
TFTP server, enter the name of the file to download, select a file on the
switch to overwrite or specify a new file name, and then click Transfer
from Server.
Setting the Startup Configuration File
If you download to a new file name, then select the new file from the
drop-down box for Startup Configuration File, and press Apply Changes.
To use the new settings, reboot the system via the System, Reset menu.

Table of Contents

Related product manuals