A
DDRESS
T
ABLE
S
ETTINGS
2-89
For example, the following screen shows the dynamic addresses for
port 21.
CLI – This example also displays the address table entries for port 11.
Changing the Aging Time
You can change the aging time for entries in the dynamic address table.
Command Attributes
• Aging Time – The time after which a learned entry is discarded.
(Range: 10-30000 seconds; Default: 300 seconds)
Web – Click Address Table, Address Aging. Specify the new aging time,
then click Apply.
Console#show mac-address-table ethernet 1/11 3-101
Interface Mac Address Vlan Type
--------- ----------------- ---- -----------------
Eth 1/11 00-10-b5-62-03-74 1 Learned
Console#
To Next Page
Loading...
Need help?
General
