SMC Networks 6724AL2

S YSTEM M ANAGEMENT C OMMANDS
3-33
Example
logging host
Use this command to add a syslog server host IP address that will receive
logging messages. Use the no form to remove a syslog server host.
Syntax
logging host host_ip_address
no logging host host_ip_address
host_ip_address - The IP address of a syslog server.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• By using this command more than once you can build up a list of host
IP addresses.
• The maximum number of host IP addresses allowed is five.
Example
Console(config)#logging history ram 0
Console(config)#
Console(config)#logging host 10.1.0.3
Console(config)#