C
OMMAND
L
INE
I
NTERFACE
3-24
Example
whichboot
Use this command to display which files were booted when the system
powered up.
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot
command. See the table under the dir command for a description of the
file information displayed by this command.
Console#dir
file name file type startup size (byte)
-------------------------------- -------------- ------- -----------
LEO_X_Diag_v2.0.1.0.bix Boot-Rom image Y 169912
LEO_X_SMC_V2042.bix Operation Code Y 1319328
Factory_Default_Config.cfg Config File N 2665
startup Config File Y 2835
-------------------------------------------------------------------
Total free space: 5505024
Console#
Console#whichboot
file name file type startup size (byte)
----------------- -------------- ------- ----------
LEO_X_Diag_v2.0.1.0 Boot-Rom image Y 169912
LEO_X_SMC_V2042 Operation Code Y 1319328
startup Config File Y 2835
Console#
To Next Page
Loading...
Need help?
General
