SMC Networks 6724AL2

P RIORITY C OMMANDS
3-199
Example
The following example shows how to map IP precedence value 1 to CoS
value 0:
map ip dscp (Global Configuration)
Use this command to enable IP DSCP mapping (i.e., Differentiated
Services Code Point mapping). Use the no form to disable IP DSCP
mapping.
Syntax
map ip dscp
no map ip dscp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
• IP Precedence and IP DSCP cannot both be enabled. Enabling one of
these priority types will automatically disable the other type.
Example
The following example shows how to enable IP DSCP mapping globally.
Console(config)#interface ethernet 1/5
Console(config-if)#map ip precedence 1 cos 0
Console(config-if)#
Console(config)#map ip dscp
Console(config)#