C
ONFIGURING
THE
S
WITCH
2-32
• Access Mode
- Read-Only – Specifies read-only access. Authorized management
stations are only able to retrieve MIB objects.
- Read/Write – Specifies read-write access. Authorized management
stations are able to both retrieve and modify MIB objects.
Web – Click SNMP, Configuration. Add new community strings as
required, select the access rights from the Access Mode drop-down list,
then click Add.
CLI – The following example adds the string “spiderman” with read/write
access.
Specifying Trap Managers
Traps indicating status changes are issued by the switch to specified trap
managers. You must specify trap managers so that key events are reported
by this switch to your management station (using network management
platforms such as HP OpenView). You can specify up to five management
stations that will receive authentication failure messages and other trap
messages from the switch.
Console(config)#snmp-server community spiderman rw 3-60
Console(config)#
To Next Page
Loading...
Need help?
General
