EasyManua.ls Logo

SMC Networks 6724AL2

SMC Networks 6724AL2
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C
OMMAND
L
INE
I
NTERFACE
3-164
dot1x max-req
Sets the maximum number of times the switch port will retransmit an EAP
request packet to the client before it times out the authentication session.
Use the no form to restore the default.
Syntax
dot1x max-req count
no dot1x max-req
count The maximum number of requests (Range: 1-10)
Default
2
Command Mode
Global Configuration
Example
dot1x port-control
Sets the dot1x mode on a port interface. Use the no form to restore the
default.
Syntax
dot1x port-control {auto | force-authorized |
force-unauthorized}
no dot1x port-control
auto – Requires a dot1x-aware connected client to be authorized by
the RADIUS server. Clients that are not dot1x-aware will be denied
access.
force-authorized – Configures the port to grant access to all
clients, either dot1x-aware or otherwise.
Console(config)#dot1x max-req 2
Console(config)#

Table of Contents

Related product manuals