EasyManua.ls Logo

SMC Networks 6724AL2

SMC Networks 6724AL2
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C
ONFIGURING
THE
S
WITCH
2-30
Setting the Time Zone
SNTP uses Coordinated Universal Time (or UTC, formerly Greenwich
Mean Time, or GMT) based on the time at the Earths prime meridian,
zero degrees longitude. To display a time corresponding to your local time,
you must indicate the number of hours and minutes your time zone is east
(before) or west (after) of UTC.
Command Attributes
Current Time – Displays the current time.
Name – Assigns a name to the time zone.
Hours (0-12) The number of hours before/after UTC.
Minutes (0-59) The number of minutes before/after UTC.
Direction Configures the time zone to be before (east) or after
(west) UTC.
Web Select SNTP, Clock Time Zone. Set the offset for your time zone
relative to the UTC, and click Apply.
CLI - This example shows how to set the time zone for the system clock.
Console(config)#clock timezone Dhaka hours 6 minute 0 after-UTC 3-58
Console#

Table of Contents

Related product manuals