SNTP C
OMMANDS
3-57
Syntax
sntp poll seconds
no sntp poll
seconds - Interval between time requests. (Range: 16-16384 seconds)
Default Setting
16 seconds
Command Mode
Global Configuration
Command Usage
This command is only applicable when the switch is set to SNTP client
mode.
Example
Related Commands
sntp client (3-55)
show sntp
Use this command to display the current time and configuration settings
for the SNTP client, and whether or not the local time has been properly
updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for
sending time synchronization requests (when the switch is set to SNTP
client mode), and the current SNTP mode (i.e., client or broadcast).
Console(config)#sntp poll 60
Console#
To Next Page
Loading...
Need help?
General
