C
OMMAND
L
INE
I
NTERFACE
3-96
show interfaces counters
Use this command to display interface statistics.
Syntax
show interfaces counters [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
Default Setting
Shows the counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
For a description of the items displayed by this command, see
“Showing Port Statistics” on page 2-80.
To Next Page
Loading...
