SMC Networks 6724AL2 User Manual

C ONFIGURING R ATE L IMITS
2-79
Rate Limit Port Configuration
Use the rate limit port configuration pages to apply rate limiting.
Command Usage
• Input and output rate limit can be enabled or disabled for individual
interfaces.
Command Attributes
• Port/Trunk– Displays the port number.
• Rate Limit Status – Enables or disables the rate limit.
• Rate Limit Level – Sets the rate limit level.
(Range: 1-30; Default: 30)
Note: Actual Rate limit = Rate Limit Level * Granularity
Web - Click Port, Rate Limit, Input/Output Rate Limit Port/Trunk
Configuration. Enable the Rate Limit Status for the required interfaces, set
the Rate Limit Level, and click Apply.

SMC Networks 6724AL2 Specifications

General

Brand	SMC Networks
Model	6724AL2
Category	Switch
Language	English