IP I
NTERFACE
C
OMMANDS
3-71
Default Setting
No static route is established.
Command Mode
Global Configuration
Command Usage
A gateway must be defined if the management station is located in a
different IP segment.
Example
The following example defines a default gateway for this device:
Related Commands
show ip redirects (3-73)
show ip interface
Use this command to display the settings of an IP interface.
Default Setting
All interfaces
Command Mode
Privileged Exec
Example
Related Commands
show ip redirects (3-73)
Console(config)#ip default-gateway 10.1.0.254
Console(config)#
Console#show ip interface
IP address and netmask: 10.1.0.254 255.255.255.0 on VLAN 1,
and address mode: User specified.
Console#
To Next Page
Loading...
Need help?
General
