S
PANNING
T
REE
C
OMMANDS
3-111
Example
spanning-tree transmission-limit
Use this command to configure the minimum interval between the
transmission of consecutive RSTP BPDUs. Use the no form to restore the
default.
Syntax
spanning-tree transmission-limit count
no spanning-tree transmission-limit
count -The transmission limit in seconds. (Range: 1-10)
Default
3
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
Console(config)#spanning-tree pathcost method long
Console(config)#
Console(config)#spanning-tree transmission-limit 4
Console(config)#
To Next Page
Loading...
Need help?
General
