C
OMMAND
L
INE
I
NTERFACE
3-168
Command Mode
Global Configuration
Example
show dot1x
Use this command to show general port authentication related settings on
the switch or a specific interface.
Syntax
show dot1x [statistics] [interface interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
• Global 802.1X Parameters – Displays the global port access control
parameters that can be configured for this switch as described in the
preceding pages, including reauth-period (page 3-168), quiet-period
(page 3-167), tx-period (page 3-168), and max-req (page 3-165). It also
displays the following global parameters which are set to a fixed value,
including the following items:
-supp-timeout – Supplicant timeout.
-server-timeout – Server timeout.
-reauth-max – Maximum number of reauthentication attempts.
Console(config)#dot1x timeout tx-period 300
Console(config)#
To Next Page
Loading...
Need help?
General
