EasyManua.ls Logo

SMC Networks 6724AL2

SMC Networks 6724AL2
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SNMP C
OMMANDS
3-61
Syntax
snmp-server community string [ro|rw]
no snmp-server community string
string - Community string that acts like a password and permits access
to the SNMP protocol. (Maximum length: 32 characters, case
sensitive; Maximum number of strings: 5)
ro - Specifies read-only access. Authorized management stations are
only able to retrieve MIB objects.
rw - Specifies read/write access. Authorized management stations
are able to both retrieve and modify MIB objects.
Default Setting
public - Read-only access. Authorized management stations are only
able to retrieve MIB objects.
private - Read-write access. Authorized management stations are able
to both retrieve and modify MIB objects.
Command Mode
Global Configuration
Command Usage
The first snmp-server community command you enter enables
SNMP (SNMP v1 and v2c). The no snmp-server community
command disables SNMP.
Example
snmp-server contact
Use this command to set the system contact string. Use the no form to
remove the system contact information.
Console(config)#snmp-server community alpha rw
Console(config)#

Table of Contents

Related product manuals