P
ORT
C
ONFIGURATION
2-65
Port Configuration
Displaying Connection Status
You can use the Port Information or Trunk Information pages to display
the current connection status, including link state, speed/duplex mode,
flow control, and auto-negotiation.
Command Attributes
• Name – Interface label.
• Type – Indicates the port type (10BASE-T, 100BASE-TX,
100BASE-FX, 1000BASE-SX, 1000BASE-LX, or 1000BASE-GBIC).
• Admin Status – Shows if the interface is enabled or disabled.
Web: Displays Enabled or Disabled.
CLI: Displays Port Admin (up or down).
• Oper Status – Indicates if the link is Up or Down.
• Speed Duplex Status – Shows the current speed and duplex mode.
• Flow Control Status – Indicates the type of flow control currently
in use.
• Autonegotiation – Shows if auto-negotiation is enabled or disabled.
• Trunk Member – Shows if port is a trunk member. (Port
Information only.)
• Creation – Shows if a trunk is manually configured. (Trunk
Information only.)
To Next Page
Loading...
Need help?
General
