SMC Networks 6724AL2 - dot1 x port-control

A UTHENTICATION C OMMANDS
3-165
• force-unauthorized – Configures the port to deny access to all
clients, either dot1x-aware or otherwise.
Default
force-authorized
Command Mode
Interface Configuration
Example
dot1x re-authenticate
Forces re-authentication on all ports or a specific interface.
Syntax
dot1x re-authenticate [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
Command Mode
Privileged Exec
Console(config)#interface eth 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#