SMC Networks 6724AL2

C OMMAND L INE I NTERFACE
3-138
GVRP and Bridge Extension Commands
GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register VLAN
members on interfaces across the network. This section describes how to
enable GVRP for individual interfaces and globally for the switch, as well
as how to display default configuration settings for the Bridge Extension
MIB.
Command Function Mode Page
Interface Commands
switchport gvrp Enables GVRP for an interface IC 3-140
switchport forbidden
vlan
Configures forbidden VLANs for an
interface
IC 3-130
show gvrp
configuration
Displays GVRP configuration for
selected interface
NE,
PE
3-140
garp timer Sets the GARP timer for the selected
function
IC 3-141
show garp timer Shows the GARP timer for the
selected function
NE,
PE
3-142
Global Commands
bridge-ext gvrp Enables GVRP globally for the switch GC 3-143
show bridge-ext Shows the global bridge extension
configuration
PE 3-144