EasyManua.ls Logo

SMC Networks 6724AL2

SMC Networks 6724AL2
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R
ATE
L
IMIT
C
OMMANDS
3-153
Command Mode
Global Configuration (Ethernet, Port Channel)
Command Usage
Actual Rate limit = Rate limit level * Granularity
Example
The following sets Fast Ethernet granularity to 1 Mbps, and Gigabit
Ethernet granularity to 33.3 Mbps.
show rate-limit
Use this command to display the rate limit granularity.
Default Setting
Fast Ethernet interface – 3.3 Mbps
Gigabit Ethernet interface – 33.3 Mbps
Command Mode
Privileged Exec
Command Usage
For Fast Ethernet interfaces, the rate limit granularity is 512 Kbps,
1 Mbps, or 3.3 Mbps.
For Gigabit Ethernet interfaces, the rate limit granularity is 33.3 Mbps.
Example
Console(config)#rate-limit fastethernet granularity 1000
Console(config)#rate-limit gigabitethernet granularity 33300
Console(config-if)#
Console#show rate-limit
Fast ethernet granularity: 3300
Gigabit ethernet granularity: 33000
Console#

Table of Contents

Related product manuals