SMC Networks 6724AL2 - Clear Logging; Show Logging

C OMMAND L INE I NTERFACE
3-36
Example
clear logging
Use this command to clear messages from the log buffer.
Syntax
clear logging [flash | ram]
• flash - Event history stored in flash memory (i.e., permanent
memory).
• ram - Event history stored in temporary RAM (i.e., memory flushed
on power reset).
Default Setting
Flash and RAM
Command Mode
Privileged Exec
Example
Related Commands
show logging (3-36)
show logging
Use this command to display the logging configuration, along with any
system and event messages stored in memory.
Syntax
show logging {flash | ram | trap}
• flash - Event history stored in flash memory (i.e., permanent
memory).
Console(config)#logging trap 4
Console(config)#
Console#clear logging
Console#