SMC Networks 6724AL2 User Manual

C OMMAND L INE I NTERFACE
3-98
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
This example shows the configuration setting for port 22.
Console#show interfaces switchport ethernet 1/22
Information of Eth 1/22
Broadcast threshold: Enabled, 32000 octets/second
Lacp status: Disabled
Ingress rate limit: disable,100M bits per second
Egress rate limit: disable,100M bits per second
VLAN membership mode: Hybrid
Ingress rule: Disabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 0
Gvrp status: Disabled
Allowed Vlan: 1(u),
Forbidden Vlan:
Private-vlan mode: NONE
Private-vlan host-association: NONE
Private-vlan mapping: NONE
Console#
Field Description
Broadcast
threshold
Shows if broadcast storm suppression is enabled or disabled;
if enabled it also shows the threshold level (page 3-94).
Lacp status Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 3-150).
VLAN
membership mode
Indicates membership mode as Trunk or Hybrid (page
3-125).
Ingress rule Shows if ingress filtering is enabled or disabled (page 3-127).
Acceptable frame
type
Shows if acceptable VLAN frames include all types or tagged
frames only (page 3-126).
Native VLAN Indicates the default Port VLAN ID (page 3-128).

SMC Networks 6724AL2 Specifications

General

Brand	SMC Networks
Model	6724AL2
Category	Switch
Language	English