118
Editing Data
Saving configuration to hard disk section
With the function a configuration file can be created and saved to a hard drive.
A Solar-Log configuration file has the following file name:
"solarlog_config.dat."
Procedure
•
Click on Prepare.
•
After the data has been prepared, the Download option is displayed.
•
Click on Download.
•
Depending on your browser settings, a window pops up with the options to open the file with a
program or save file.
•
Select Save file.
•
The file is saved in the download folder.
Alternative procedure
•
Click on Prepare.
•
After the data has been prepared, the Download option is displayed.
•
Right click with the mouse on Download.
•
Select Save link as.
•
The file manager of your OS appears.
•
Select the desired location to save the file to.
•
Select save.
•
The file is saved in the selected folder.
Saving configuration to USB section
With this function, a backup can be saved to a USB stick which is directly connected to the device.
Procedure
•
Touch Save.
•
The configuration is being created. Please wait a moment.
•
The progress and status of the update are displayed
Finish current measurement
Select the USB storage device
Save configuration
•
The solarlog_config_YYMMDD.dat file is saved in the /Backup directory of the USB stick.
YYMMDD = year, month and day - each two digits, e.g. solarlog_config_161212.dat is then the
backup from 12 December 2016.
•
The configuration file can be saved elsewhere as a backup or imported into the Solar-Log™ again.
To Next Page
Loading...
Need help?
General
