Solar-Log 2000 Installation Manual

37
Connecting the inverters
11.1 Switch o the inverters and the Solar-Log™.
Switching inverters off
Before a making a cable connection between the Solar-Log™ and the connections inside the inverter and
before installing an interface card in the inverter, always turn off all of the inverters first.
To do this, read the manufacturer's documentation for the inverter, and proceed as follows:
•
Disconnect the AC side
•
Disconnect the DC side
•
Wait at least 5 minutes until the condensers in the inverters have discharged.
Turn the Solar-Log™ off.
 Unplug the power socket connection

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal