96
Configuring connected devices
18.4.3 Configuring sensors
Under sensors, the configuration only comprises of activating other sensors.
Procedure:
•
Use the Ambient Temperature and/or Wind button to activate the sensors.
•
If needed, make assignments to the module field.
•
SAVE the settings.
18.4.4 Module Fields, Power Output and Descriptions
Depending on the device type (power meter, inverter, etc.), different settings can adjusted from the Mod-
ule Fields, Power Output and Descriptions menu. See the following chapters:
•
Configuring inverters
•
Configuring power meters
•
Configuring sensors
In this section, for example, the device name can be changed and the nominal power (maximum AC out-
put) of the individual devices can be defined.
The nominal power (maximum AC output) if the average consumption or the average energy production
of a device and is used, for example, for the profile controls (Smart Energy).
Note!
The most exact that the configured nominal power corresponds to the actual consump-
tion, the more accurately the control of consumption via Smart Energy is.
To Next Page
Loading...
