Solar-Log 2000 Installation Manual

170
Direct Device Configurations (Solar-Log 1200 and 2000)
Note!
For the interface definition, tt is important to note that devices from different manufac-
tures cannot be connected to the sam bus since this can lead to communication prob-
lems.
Device class selection based on an example
Inverter selection (example: Bonfiglioli)
Procedure:
•
Select the inverter.
Fig.: Inverter selection
•
Defining the interface
Fig.: Interface denition

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal