124
System Configuration
Note!
We advise installers to discuss with their customers the scope of the settings in the area
of feed-in management, to block the configuration menu using a password and to assign
an individual password.
Procedure
•
Activate the password restriction for the desired menus.
•
Enter a secure password for each of the menus
•
Enter the password again
•
SAVE the settings.
22.2 Language/Country/Time
The following options are available from the Configuration | System | Language/Country/Time menu:
•
System language of the Solar-Log™
•
Country/Location of the Solar-Log™
•
System time of the Solar-Log™
•
Time synchronization
Language section
Procedure
•
Select the desired language from the menu
The selected display language applies both to the display and the web browser.
•
SAVE the settings.
Country section
Procedure
•
Select your Country from the menu.
The country setting affects how the date, time and currency formats are displayed.
•
SAVE the settings.
Time section
Solar-Log™ has an integrated real-time clock which can maintain the clock time even in the case of a power
failure or grid disconnection, and for a long period (50 days).
The clock time is factory-set, but it may be lost due to long periods of storage.
The time zone, date and summertime values must be set correctly, so that no incorrect statuses or results
are obtained during monitoring and graph display, e.g. when e-mail messages are sent or when a curve is
displayed on the day graph.
Fig.: Conguring the time on the Solar-Log™
To Next Page
Loading...
Need help?
General
