186
Notifications on the LCD Status Display (Solar-Log 250, 300, 1200 and 2000)
27.2 Notifications on the LCD display
There is a difference between the Easy Installation mode and normal operation in regard to the notifica-
tions on the LCD display.
27.3 Normal operation
The symbol for the connected components is continuously illuminated.
When there are no problems or faults, OK is displayed.
Fig.: LCD display during normal operation
Explanation:
The following devices are connected: inverter, irradiation sensor and meter
Communication: WiFi encrypted, strong signal and Internet communication established.
27.4 Power reduction
When a power reduction (<100%) is active, this is indicated on the LCD or VLC display (left display field of
the Solar-Log™ WEB interface). It is indicated even when it is just a fixed reduction.
Fig.: Display 70% xed reduction
To Next Page
Loading...
