Solar-Log 2000 Installation Manual

127
System Configuration
22.4 Licenses
Certain Solar-Log™ functions have to be activated by entering a license code. You receive a license certifi-
cate after purchasing a license for a particular function. The licenses are always linked to the serial number
of the particular Solar-log™ and can only be used with the device with this serial number.
Procedure
•
Enter the license code in the license code section.
•
Activate license code.
Activating licenses section
In the Active licenses section, all of the activated functions and license codes are displayed.
Entering a license code
Enter a License code to activate this function. The name of the license is displayed in the Active License
section.
22.5 Firmware
The firmware tab offers the following functions:
•
Information about the current firmware version
•
Firmware Update
Status section
The firmware version currently installed on the Solar-Log™ is displayed. The version number contains three
sections:
Version number Build Date
3.5.2 Build 85 - 12.12.2016

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal