Solar-Log 2000 Installation Manual

82
Configuration Menu
16.5 Proxy
Fig.: Proxy settings
The proxy function is not enabled by default. To use a proxy Display advanced configuration needs to be
activated under Configuration | System.
The proxy settings need to be configured in the Solar-Log™ to enable Internet communication via the
proxy server. Proxy servers are typically used in the networks of organizations and companies.
The data transfer only refers to the FTP transfer.
Procedure
•
When using a proxy, select Connect Method.
•
Enter proxy server, port, user name and password.
•
SAVE the settings.

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal