125
System Configuration
Adjust the time in the Configuration | System | Language/Country/Time menu.
Adjust the new system time
Procedure
•
The current system time is displayed
•
To change the time, enter the new time in the following format
DD/MM/YY HH:MM:SS
For example: 12.12.16 4:14:05 PM for 12 December 2016 16 Hours 14 Minutes 05 seconds (2:14 p.m.)
•
SET a new date and time
Adjust the time zone
Procedure
•
Enter the time difference in hours.
Default: GMT +1
•
Save Entry .
Set Day Light Saving Time.
Procedure
•
Select the corresponding Day Light Saving Time settings
Options: no, CEST (Central European Summer Time), USA
•
SAVE settings
Automatic time synchronization section
To automatically synchronize the system time, the Solar-Log™ regularly contacts a network time protocol
(NTP) server.
If the Solar-Log™ is connected to the Internet via a router, the synchronization occurs during the night.
With a GPRS connection, the time synchronization occurs during a data transfer.
Procedure
•
Activate the Automatic time synchronization button.
•
SAVE the settings.
Update now function, the time synchronization with the NTP server can be manually started. The NTP port
123 needs to be enabled in the gateway or firewall.
To Next Page
Loading...
