61
Connecting accessories
Connecting the Allnet network power socket to the Solar-Log™
The Allnet socket has to be defined with the device detection function to connect to the Solar-Log™. From
the WEB interface of the Solar-Log™ go to Configuration | Devices | Definition and select the device class
"Switch" with the blue plus symbol and then Allnet as the manufacturer followed by the type and number
of devices. Confirm the selection with OK and start the detection from the Configuration | Devices | De-
tection menu. Let the detection process run completely. After that, select the corresponding devices from
the Configuration | Devices | Configuration menu, enter the IP address and perform the rest of the setup.
Click on save once everything is finished.
To Next Page
Loading...
Need help?
General
