9 3D Imaging
106 Basic User Manual
9.2.12 Restoring the Image
Tap
3D/4D
>
Reset
to restore the relevant settings.
9.2.13 Customizing Presets
You can modify parameters, adjust sample volume or ROI in the 3D mode and save them as the application preset
for future use. Moreover, the customized layout of the application mode screen can be modied and restored to
factory defaults.
NOTE:
Only the volume probes are capable of this feature.
For details, refer to Section 6.1 Selecting a Probe and an Exam Type.
The application presets can be displayed as options of the User Mode item in the inactivated 3D mode.
9.2.14 Performing Follicle Auto-Measurement
Tap AVC Follicle > Left Ovary/Right Ovary to automactically measure the number and the volume of follicles,
and the position of follicles is displayed on three reference images and 3D image.
To Next Page
Loading...
Need help?
General
