Sonoscape S20 Plus User Manual

4 Customizing Your System
46 Basic User Manual
Item Description
Service List Select the MPPS server.
●
Select Append from the drop-down list beside Service List, input the relevant
parameters information and click Add to add a new server.
●
Select any server from the drop-down list and click Delete to delete the server.
Remote Host Name Enter the name of the MPPS server.
IP Address Set the IP address of the MPPS server.
After the setting, click Ping to test the connection.
DICOM AE Title Set the Application Entity (AE) title of the MPPS server.
Port Number Set the port number of the MPPS server.
Connect Timeout(sec) Set the time limit for the network connection timeout.
Repeat Count Set the number of repeated attempts for connecting to the MPPS server.
Dimse Timeout(sec) Set the timeout time for sending the Dimse command.
Acse Timeout(sec) Set the timeout time for sending the Acse command.
Click Echo to verify the connection between the system and the server after you input the settings. A summary
displays if the connection is veried.
4.8.5 Print Service Settings
You can connect the system to the print service server and adjust the relevant settings on the Print Service tab.

Sonoscape S20 Plus Specifications

General

Brand	Sonoscape
Model	S20 Plus
Category	Medical Equipment
Language	English