4 Customizing Your System
28 Basic User Manual
Item Description
Hospital Name Enter the institution’s name.
Freeze Response Select the feature to be enabled after you select the Freeze key.
Trackball
Sensitivity
Adjust the sensitivity for the trackball movement. A greater value brings about a higher
sensitivity.
Language Choose a system language for the user interface, and reboot the system for it to take
effect.
Time Zone Set the local time zone.
Date Format Set the date format for the system.
Date/Time Setting Set the system date and time.
Select this item to set the system date and time manually in the pop-up text box.
NOTE:
You should set the system date and time for your initial use of the system.
Time Format Set the time format between 12 Hour and 24 Hour.
Monitor Type Set the video type.
Caps Lock Enable or disable the capital letter feature.
●
Set it to ON, all the typed letters are capital. Pressing Shift + X can enter a lower-case
letter.
●
Set it to OFF, all the typed letters are lowercase. Pressing Shift + X can enter a capital
letter.
Clear Annot On
Unfreeze
Enable or disable the annotation-cleared feature after you unfreeze the image in the
annotation editing mode.
●
Set it to ON, all annotations are cleared after you press the Freeze key in the
annotation editing mode.
●
Set it to OFF, all annotations are not cleared.
Guide Line Type Select a type for the biopsy guidelines.
●
Set it to
Gun
, one biopsy guideline is displayed when performing the biopsy.
●
Set it to
Needle
, two parallel biopsy guidelines are displayed when performing the
biopsy. These guidelines make up the guide zone within which is used to guide a safe
biopsy.
Focal Auto Enable or disable the auto-focus feature.
●
Set it to
On
, the focal depth varies with the depth in the B mode.
The focal depth varies with the ROI position in the CFM/PDI/TDI mode.
●
Set it to
Off
, the system never adjusts the focal depth.
To Next Page
Loading...
Need help?
General
