Chapter 19 Control Panel Setup (Panel)
1110
Overall Control Panel Settings (Config Menu)
• Buttons in the memory recall section during macro editing
6
Press [Set] to confirm the setting.
This assigns the menu or action selected in the list to the button.
To cancel an assignment
Select the button, then press [Clear].
To return all button assignments to the factory default state, press [Default].
Assigning a Function to the Independent Key Transition
Control Block (Simple Type)
You can assign a function to the buttons in the independent key transition
control block (simple type).
The assignment may be to the independent key transition type selection buttons
and buttons in the independent key transition execution section.
1
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
2
Press [Compact Key Trans Module].
The Compact Key Transition Mode menu appears.
3
In the <Bank Select> group, select the bank you want to manipulate.
4
According to the selected bank, select the control block to be assigned, in
the <Module Select> group.
Function Button indication
Undo UNDO
Pause setting PAUS
Auto insert mode on or off AUTO INS
Copy COPY
Paste PSTE
Select all ALL
Insert INS
Modify MOD
Delete DEL
Set range FROM TO
Go to specified event GOTO EVNT
To Next Page
Loading...
