Chapter 2 Menus and Control Panel
120
Basic Menu Operations
a) When the three-dimensional transformation operation mode is enabled.
b) When the [MENU] button is Off.
c) When the [MENU] button is On.
d) When the resizer control mode is enabled.
a) When the [TIMELINE] button is Off.
b) When the [TIMELINE] button is On.
a) When a key other than DSK1 or DSK2 is assigned, the menu for the corresponding key appears.
Device control block (trackball or joystick)
Buttons Menus See
DME1 to DME8
a)
DME >XX Chapter 11
(Volume 2)
DEV1 to DEV12 assigned
buttons
• Device >DDR/VTR >Cueup & Play
b)
• Device >DDR/VTR >Timeline
c)
Chapter 12
(Volume 2)
FM1CLIP to FM8CLIP
assigned buttons
Frame Memory >Clip >Recall page 403
K1RSZ to K8RSZ
d)
• M/E-1, 2, 3, 4 >Key1, 2, 3, 4, 5, 6, 7, 8
>Processed Key
• PGM/PST >DSK1, 2, 3, 4, 5, 6, 7, 8 >Processed
Key
page 270
Device control block (search dial)
Buttons Menus See
DEV1 to DEV12 • Device >DDR/VTR >Cueup & Play
a)
• Device >DDR/VTR >Timeline
b)
Chapter 12
(Volume 2)
FM1CLIP to FM8CLIP
assigned buttons
Frame Memory >Clip >Recall –
Downstream key/fade-to-black control block
Buttons Menus See
DSK1, DSK2 PGM/PST >DSK1, 2 >XX
a)
page 217
Transition control block and Flexi Pad control block (simple type)
Buttons Menus See
KEY1 (DSK1) • M/E-1, 2, 3, 4 >Key1 >XX
• PGM/PST >DSK1 >XX
page 217
KEY2 (DSK2) • M/E-1, 2, 3, 4 >Key2 >XX
• PGM/PST >DSK2 >XX
WIPE • M/E-1, 2, 3, 4 >Wipe >Main Pattern
• PGM/PST >Wipe >Main Pattern
page 293
DME • M/E-1, 2, 3, 4 >DME Wipe >XX
• PGM/PST >DME Wipe >XX
page 349
FM1CLIP to FM8CLIP
assigned buttons
• M/E1, 2, 3, 4 >Misc >Clip Transition
• PGM/PST >Misc >Clip Transition