21
Table of Contents
Installing Software ............................................................................1060
Making Settings Required to Use the Software ................................1062
Adding User Texture Patterns ...........................................................1065
Setting the DME Input/Output Signal Format ..................................1072
System Maintenance (Maintenance Menu)............................................1073
Setting the Date and Time .................................................................1073
Using a Memory Card .......................................................................1074
Carrying Out the Primary Setting......................................................1075
Reloading a USB Driver....................................................................1075
Initializing the Hard Disk..................................................................1075
Locking the Setup Menu Settings .....................................................1076
Locking File Loading Operations......................................................1079
Chapter 19 Control Panel Setup (Panel)
Overall Control Panel Settings (Config Menu)......................................1082
Panel Setup ........................................................................................1082
Interchanging the Bank Order or Disabling Operation .....................1083
Assigning Two M/E Banks to One M/E Bank..................................1084
Assigning the Key Delegation in the Downstream Key Control Block
................................................................................................1085
Linking Switcher Bus and Router Destination..................................1086
Linking Transitions Between Keyers ................................................1089
Linking the Next Transition Selection Buttons.................................1089
Selecting the Module to be the Reference for Device Control Block
................................................................................................1090
Assigning a Region to the Region Selection Buttons in the Numeric
Keypad Control Block or Multifunction Flexi Pad Control Block
................................................................................................1091
Setting Transition Control Block Button Assignments.....................1093
Setting the Assignment of Macro Operation Buttons .......................1094
Assigning the Dual Background Bus Mode Switching Function......1095
Assigning the Utility/Shotbox Mode Switching Function ................1096
Assigning the Function to Disable Cross-Point Button Operations to a
Button.....................................................................................1096
Assigning the AUX Bus Control Mode Switching Function............1097
Assigning Keys to the DSK1 and DSK2 Buttons in the Downstream Key/
Fade-to-Black Control Block .................................................1098
Assigning Keys to the Independent Key Transition Control Block
(Simple Type) ........................................................................1098
To Next Page
Loading...
