22
Table of Contents
Assigning Functions to Key Control Block Buttons .........................1101
Assigning Preview Output to Preview Selection Buttons .................1102
Assigning Functions to the Device Control Block............................1103
Inhibiting Utility 2 Bus and Key Operations.....................................1105
Inhibiting DME Channel Selection Operations.................................1106
Assigning Functions to the Menu Control Block Top Menu and User
Preference Buttons .................................................................1106
Assigning Functions to the Buttons in the Multifunction Flexi Pad
Control Block.........................................................................1107
Assigning a Function to the Independent Key Transition Control Block
(Simple Type) ........................................................................1110
Cross-Point Settings (Xpt Assign Menu) ................................................1113
Creating Cross-Point Assign Tables..................................................1114
Copying Cross-Point Assign Tables..................................................1119
Selecting Cross-Point Assign Tables ................................................1120
Exporting Source Names and Destination Names.............................1121
Making Settings for Audio Mixer .....................................................1122
Assigning a Cross-Point Button to Enable/Disable Side Flags.........1123
Auxiliary Bus Control Block Settings (Aux Assign Menu)...................1124
Assigning a Bus to an AUX Delegation Button................................1124
Using the Auxiliary Bus Control Block for Router Control .............1125
Setting Button Assignments (Prefs/Utility Menu) .................................1130
Assigning Functions to User Preference Buttons..............................1130
Assigning a Function to a Memory Recall Button in the Utility/Shotbox
Control Block.........................................................................1135
Assigning a Function to the Key 2 Row Cross-Point Buttons ..........1141
Interfacing With External Devices (Device Interface Menu) ...............1142
Making Control Panel GPI Input Settings.........................................1142
Making Control Panel GPI Output Settings ......................................1145
Setting the Control Mode for P-Bus Devices....................................1147
Setting the SCU Editor Panel Port ....................................................1147
Making DCU Serial Port Settings .....................................................1148
Sharing Disk Recorder/Extended VTR File Lists .............................1149
Setting the AUX Bus Override Operating Mode ..............................1150
Operation Settings (Operation Menu)....................................................1151
Setting the On-Air Tally....................................................................1152
Setting the Transition Rate Display Mode ........................................1152
Making Settings Relating to Effects..................................................1153
Setting the First Keyframe When a Rewind is Executed ..................1153
To Next Page
Loading...
