Chapter 4 Keys
281
Resizer
Notes
If mosaic is enabled, and in the <Mosaic/Defocus Mode> group you select
Video/Key, then the crop and mask are disabled.
4
Set the parameters.
To make the mosaic like a relief pattern
1
With [Mosaic] on, press [Relief], turning it on.
2
In addition to the mosaic parameters, set the following parameters.
Defocusing
1
In the M/E-1 >Key1 >Processed Key >Enhanced Effect menu, press
[Defocus], turning it on.
2
Set the parameters.
This operation is the same as the defocusing setting when using the DME.
However, <Mosaic/Defocus Mode> appears in place of <Defocus Mode>.
For more details, see “Defocus Settings” in Chapter 11 (Volume 2).
Notes
If defocus is enabled, and in the <Mosaic/Defocus Mode> group you select
Video/Key, then the crop and mask are disabled.
Applying a mask to mosaic or defocus
1
In the M/E-1 >Key1 >Processed Key >Enhanced Effect menu, press [Dual
Rszr Effect], turning it on.
Knob Parameter Adjustment Setting values
1 H Horizontal defocusing 0.00 to 100.00
2 V Vertical defocusing 0.00 to 100.00
3 All Horizontal and vertical defocusing H value shown
Knob Parameter Adjustment Setting values
3 Gain Relief depth of mosaic cells 0.00 to 100.00
4 Angle Light source direction –8.00 to +8.00
To Next Page
Loading...
