Chapter 7 Frame Memory
406
Frame Memory Clip Operations
2
When [Pair] is Off, press a target FM selection button to select the target.
3
To set loop playback, press [Loop], turning it on.
4
To start playback, press [Play]. During playback, to stop, press [Stop].
To cue up
Press [Cue].
To play the image at the beginning of the clip (Clip Begin)
Press [Rewind].
To play the image at the end of the clip (Clip End)
Press [FF].
Playback start point
(pale blue bar)
Current position
(red bar)
Playback end point
(yellow bar)
Status buttons
These show the timecode values for
the start point, current position, and
end point.
To Next Page
Loading...
