olution by dragging the time sliders. A pop-up window will display the legend for that
graph, and the status information for the selected time.
3.3.2.2 Determining Your GNSS Receiver Model
To determine which GNSS receiver model is installed in a SecureSync unit:
Note: If a SecureSync unit is used exclusively as a Stratum2 server, it may not be
equipped with a GNSS receiver at all.
1.
Navigate to TOOLS > SYSTEM: Upgrade/Backup.
2.
In the System Configuration panel, locate the line item GNSS Receiver:
GNSS Receiver Models
Spectracom strives to equip SecureSync with current technology. Depending on the production
date of your SecureSync unit, one of the following GNSS receiver models will be installed in
your unit (if any):
Trimble Res-T
®
170
CHAPTER 3 • SecureSync User Reference Guide Rev. 23
3.3 Managing References
To Next Page
Loading...