Host: The address of the TACACS+ server
Port: The port number of the TACACS+ server
Secret Key: The same encryption key as used on the TACACS+ server.
4.
Click the Add Server button. A confirmation message "The item has been added" will be
displayed if the server could be added, and the server will be added to the list.
Note: SecureSync supports multiple TACACS+ servers. The system per
formance, however, will be negatively affected by a large number of serv
ers or invalid servers, respectively.
The Server Status can be:
DISABLED: The TACACS+ service is disabled (see below to enable it)
UNREACHABLE: This TACACS+ server cannot be reached.
REACHABLE: This TACACS+ server can be reached.
5.
To delete a TACACS+ server from the list, click the X-button in the Actions column.
4.3.6.2 Enabling/Disabling TACACS+
1.
Navigate to MANAGEMENT > OTHER: Authentication.
2.
In the Actions panel on the left, click TACACS+. The TACACS+ Setup window will be
displayed:
248
CHAPTER 4 • SecureSync User Reference Guide Rev. 23
4.3 Managing Users and Security
To Next Page
Loading...