2.12.3 Subnet Mask Values
Table 2-2:
Subnet mask values
Network Bits Equivalent Netmask Network Bits Equivalent Netmask
30 255.255.255.252 18 255.255.192.0
29 255.255.255.248 17 255.255.128.0
28 255.255.255.240 16 255.255.0.0
27 255.255.255.224 15 255.254.0.0
26 255.255.255.192 14 255.252.0.0
25 255.255.255.128 13 255.248.0.0
24 255.255.255.0 12 255.240.0.0
23 255.255.254.0 11 255.224.0.0
22 255.255.252.0 10 255.192.0.0
21 255.255.248.0 9 255.128.0.0
20 255.255.240.0 8 255.0.0.0
19 255.255.224.0
2.13 Accessing the WebUI
SecureSync's WebUI is the recommended tool to interact with the device, since it provides
access to nearly all configurable settings, and obtain comprehensive status information without
having to use the Command Line Interpreter (CLI).
You can access the Web UI either by using the automatically assigned DHCP IP address, or by
using a manually set static IP address (see "Assigning a Static IP Address" on page45):
1.
On a computer connected to the SecureSync network, start a web browser, and enter the
IPaddress shown on the SecureSync front panel, or setup manually beforehand into the
web browser address.
2.
When first connecting to the Web UI, a warning about security certificates may be dis
played:
52
CHAPTER 2 • SecureSync User Reference Guide Rev. 23
2.13 Accessing the WebUI
To Next Page
Loading...
Need help?
General