3.
Check the box HTTP/HTTPS, and click Submit to enable TACACS+ on this SecureSync.
(Uncheck the box and click Submit to disable TACACS+).
4.3.7 HTTPS Security Levels
SecureSync supports two different modes of HTTPS operation:
The Standard HTTPS Level allows the use of medium strength ciphers and older TLS
(Transport Layer Security) protocols,
while the High-Security Level is restricted to strong ciphers and TLS version 1.2 exclus
ively.
While Standard Mode is the default setting, the High-Security Level is preferred (unless you
require the extra compatibility), since High Security turns off TLSv1, which has known secur
ity vulnerabilities.
4.3 Managing Users and Security
CHAPTER 4 • SecureSync User Reference Guide Rev. 23
249
To Next Page
Loading...