Select Continue....
Note: "Cookies" must be enabled. You will be notified if Cookies are dis
abled in your browser.
Note: HTTPS only: Depending on your browser, the certificate/security
pop-up window may continue to be displayed each time you open the
Web UI until you saved the certificate in your browser.
Note: Static IPaddress only: To prevent the security pop-up window from
opening each time, a new SSL Certificate needs to be created using the
assigned IP address of SecureSync during the certificate generation. See
"HTTPS" on page61 for more information on creating a new SSL cer
tificate.
3.
Log into the Web UI as an administrator. The factory-default administrator user name
and password are:
Username: spadmin
Password: admin123
Note: For security reasons, it is advisable to change the default credentials,
see: "The Administrator Login Password" on page232.
4.
Upon initial login, you will be asked to register your product. Spectracom recommends
to register SecureSync, so as to receive software updates and services notices. See also
"Product Registration" on page258.
Number of login attempts
The number of failed login attempts for ssh is hard-set to (4) four. This value is not customer-con
figurable.
The number of failed login attempts for the Web UI (HTTP/HTTPS) is hard-set to (5) five failed
login attempts, with a 60 second lock. These two values are not customer- configurable.
To continue with the configuration, see e.g., "The Web UI HOME Screen" on page17.
To learn more about setting up different types of user accounts, see "Managing User Accounts"
on page227.
2.13 Accessing the WebUI
CHAPTER 2 • SecureSync User Reference Guide Rev. 23
53
To Next Page